Product Search

 
Call Us 800-628-0885 or 1-703-256-8900
 
Item Added to Cart
 
 
 
Bookmark Print Page Recently Viewed

You have not viewed any products recently.

 
 
  • alt view name
  • alt view name
  • alt view name
  • alt view name
  • alt view name
  • alt view name
LabSat 3 Wideband
LabSat 3 Wideband
Alternative Views
  • LabSat 3 Wideband Measurements
  • LabSat 3 Wideband Solid State Hard Drive
  • LabSat 3 Wideband Inputs
  • LabSat 3 Wideband System Set Up
  • LabSat 3 Wideband Logo
  • LabSat 3 Wideband
 
 
 

LabSat 3 Wideband

Item# LABSAT3WB

The new LabSat 3 Wideband is the latest generation of the hugely successful LabSat 3 GNSS Simulator. Building on the original triband version, LabSat 3 Wideband is now capable of recording bandwidth of 56 MHz across all constellations to capture the following signals: GPS: L1 / L2 / L5; GLONASS: L1 / L2 / L3; BeiDou: B1 / B2 / B3; QZSS: L1 / L2 / L3; Galileo: E1 / E1a / E5a / E5b / E6; SBAS and IRNSS! View Full Description

Category: All Equipment
Manufacturer: LabSat by Racelogic
LabSat by Racelogic
 


 
 
 

LabSat 3 Wideband from Racelogic

GNSS Record and Replay with a Recording Bandwidth of up to 56Mhz! (Available Late November 2016)

This is the LabSat multi-constellation simulator everyone has been asking for. LabSat continues to establish itself as a reliable, cost-effective, easy to operate system, but now with significantly expanded capabilities -- all benchmarks of the LabSat system. LabSat has expanded the LabSat 3 simulator to record and replay bandwidths of up to 56 MHz across ALL constellations. This means that in additions to L1, you can now record, replay and simulate* the following: (*Simulate when bundled with the SatGen 3 software.)

BANDWIDTH: A 56MHz recording bandwidth at 4 or 6 bit allows for the capture of a wide range of live-sky satellite signals:

  • GPS: L1 / L2 / L5
  • GLONASS: L1 / L2 / L3
  • Galileo: E1 / E1a / E5a / E5b / E6
  • BeiDou: B1 / B2 / B3
  • SBAS: WAAS, EGNOS, GAGAN, MSAS, SDCM
  • QZSS: L1 / L2 / L5
  • IRNSS

FEATURES

  • Wide bandwidth recording at up to 56MHz
  • Three frequency sets / channels
  • 4 or 6 bit capture
  • One touch record and replay
  • 1 TB SSD hard drive
  • SD card interface
  • Internal battery - up to two hours of use
  • Standalone operation, or via external control
  • Compact form factor; only 1.2kg

APPLICATIONS: LabSat 3 Wideband is suitable for the testing and development of a whole host of products within a wide variety of applications:

  • Drones
  • Autonomous vehicles
  • Surveying equipment
  • Personal monitoring devices
  • Aerospace
  • End of line product testing

SMALL, LIGHTWEIGHT ENCLOSURE
LabSat 3 Wideband is housed in a conveniently small enclosure measuring 167mm x 128mm x 46mm and weighing only 1.2kg, so it can be used to record GNSS signals anywhere. Subsequent replay is entirely realistic to allow for robust product development and testing.

The system is simple to use with one touch record and replay and SSD logging, and no requirement for a connected computer. An inbuilt battery pack gives two hours of use, and a 1 terrabyte solid-state hard drive is supplied as standard.

RECORD AND REPLAY ADDITIONAL SIGNALS
LabSat 3 Wideband can record a range of additional signals, synchronised to the GNSS input: dual-CAN, RS232, and digital inputs are simultaneously captured increasing the level of playback realism and allowing for a wider range of testing. This flexibility means that the development of products incorporating this variety of signal streams can be conducted with absolute convenience on the bench, without the need for costly and time consuming field trials. NMEA data is also recorded via the inbuilt GNSS receiver.

FUTURE-PROOFING YOUR PRODUCTS
With LabSat 3 Wideband, you are able to develop your products and systems ready for new GNSS receivers capable of using the signals likely to start broadcasting within the next few years. With the advent of L2C, L5, and L1C, the next generation of GNSS devices will have increased accuracy and capabilities -- LabSat 3 Wideband gives you the opportunity to develop your products to be compatible with new receivers as they come to market.

 

LabSat 3 Wideband Specifications

  LABSAT 3 WIDEBAND
CONSTELLATIONS       

GPS: L1, L2, L5

Galileo: E1, E5a/b, E6

GLONASS: L1, L2, L3

BeiDou: B1, B2, B3

QZSS: L1, L2

IRNSS: L5

In Band SBAS

Further signals in the upper and lower L band can be configured with the internal webserver. Bespoke requirements like Iridium & Sirius XM radio frequencies are available on request.

Output Signal Level   Adjustable -73dBm to -162dBm
RF Channels 3
RF Channel 1 Center Frequency    Selectable
RF Channel 2 Center Frequency  Selectable
RF Channel 3 Center Frequency  Selectable
Number of Satellites Observed All in view
Sampling Frequency 10.23MHz, 30.69MHz, 56MHz
Bandwidth 10MHz, 30 MHz, 56 MHz
Quantization 1, 2 or 3 bit
Data Format I & Q
Additional Logging 2x CAN channels, 4x Digital Channels
Removable Battery Pack Yes
Media Storage Included 1TB SSD & 4GB SD card (SD card for firmware upgrade only)?
Active Antenna Voltage Supply 2.8 - 4.6v
Reference Oscillator

TCXO
Temperature Stability /- 0.05 ppm
Frequency Stability /- 1 ppm over first year

OCXO
Temperature Stability /- 0.05 ppm 
Frequency Stability /- 0.3 ppm over first year
Operating Voltage 8v to 30 VDC
Size 167mm x 128mm x 46mm
Weight 1.2 Kg

 

LabSat 3 Wideband Bundles

 

LABSAT SYSTEM
(Part Number)

DESCRIPTION
RLLS03WP/S3W

LabSat 3 Wideband Replay System with SatGen v3 Wideband Software:

RLLS03W-P LabSat 3 Wideband Replay only System
RLLSSGSW03-W SatGen V3 Wideband L2 & L5 64Bit Software
RLLS03WR/S3W

LabSat 3 Wideband Replay and Record System with SatGen v3 Wideband Software:

RLLS03W-RP LabSat 3 Wideband Record and Replay System
RLLSSGSW03-W SatGen V3 Wideband L2 & L5 64Bit Software