NAVCOM SF-5050 Receiver
John Deere has discontinued the manufacturer and sale of ALL hardware products under the NAVCOM brand effective June 30, 2020.
Product purchased prior to June 30 are deliverable through October 31, 2020.
Signal Subscriptions Purchased After June 30:
You can still purchase signal subscriptions for your SF-3050 and SF-5050 series hardware from John Deere after June 30, 2020. HOWEVER, You will need to upgrade your SF-3050 and SF-5050 series firmware before the end of 2020 in order to keep using the existing signals. The signal structure will change at that point and the free upgrade will be required. For further information please visit www.navcomtech.com.
End of Technical Support:
SF3050 – April 30, 2024;
SF5050 – October 31, 2025
NavtechGPS carries many other hardware brands that can perform the same types of tasks should you want to switch to a brand that will continue past the above deadlines.
NavComs SF-5050 integrated StarFireTM/RTK ExtendTM receivers provide 5cm-level position accuracy, anywhere in the world, anytime. Powered by the new Onyx GNSS Engine, the SF-5050 provides 255 channel tracking, including multi-constellation support for GPS and GLONASS. It also provides patented interference rejection and anti-jamming capabilities.
All-in-view parallel tracking with 255 channels
SBAS (WAAS/EGNOS/MSAS/GAGAN) tracking
Built-in 3-channel StarFire receiver and demodulator:
- GPS: L1 CA, P1,L2 L2CA, P2, L2CL, L5 L5Q
- GLONASS: G1 G1C, G2 G2C
- Beidou: B1 B1l, B2 B2I
- Galileo: E1 E1B, E5A E5AQ, E5B E5BQ
High sensitivity / low signal level tracking
Fast acquisition / re-acquisition
Superior interference suppression (both in-band & out-of-band)
Patented multipath rejection
StarFire Over IP delivery (Optional)
Over-the-air StarFireTM licensing option
Minimal data latency
Data message formats:
- NMEA-0183: ALM, DTM, GBS, GFA, GGA, GLL, GNS, GRS, GSA, GST, GSV, HDT, MLA, RMC, RRE, ROT, TTM, VTG, ZDA, PNCT, NCT proprietary
- Differential Correction: SBAS and StarFire (proprietary)
- RTK Correction: RTCM 2.3, 3.0, and MSM, NavCom Proprietary UltraRTKTM
- Receiver Control: NavCom proprietary commands