Home » Products » GNSS Equipment » NALDCBS1X8-T/3.3/MC Print Page

Item #: NALDCBS1X8



The NALDCBS1X8-T/3.3/MC is one of the configurations available for the GPS Networked Amplified 1X8 Splitter, DC blocked, 110VAC, 5VDC splitter. See related products for other configurations or call us. 

SKU: NALDCBS1X8-T/3.3/MC Categories: , , Manufacturer: GPS Networking

GPS Networking NALDCBS1X8-T/3.3/MC

This product sold in the configuration shown. See the related products tab for other configurations or call us. 

The NALDCBS1X8-T/3.3/MC GPS Networked Amplified Splitter is a one input, eight output device with 13dB minimum gain. The frequency response covers the GPS L1 & L2 bands with excellent gain flatness. In the normal configuration, one of the splitter RF outputs (J1) passes DC from the connected GPS receiver through the splitter to the antenna, allowing the GPS receiver to power both the antenna and the splitter’s amplifier. The other RF outputs (J2, J3, J4, J5, J6, J7 and J8) are DC loaded with 200 (O) ohms resistors to simulate antenna current draw to prevent antenna fault readings from connected GPS receivers.
NALDCBS1X8-T/3.3/MC is available with BNC, N-type, SMA, or TNC connectors. Available with 110, 220, 240, or MC, including, for example, configurations such as NALDCBS1X8-T/3.3/MC. Please see related products or call us for information. 
NavtechGPS is your GPS Networking source for RF networking products, including splitters and amplifiers for distributed antenna systems (DAS).

If you chose networking, you must also choose power options. Please review this explanation of your power options. 

For military power options, please download this PDF: Military Power Options (MC vs MC28)

Scroll to Top